The ideal bicycle storage

from £ 1,569.00
Incl. 20 % VAT, price valid in GB
Free Shipping within 3 weeks
  • Ideal for bicycles, e-bikes, prams and more.
  • Rainwater-proof and lockable
  • Space saver
  • Double the sheet steel thickness compared to low-cost providers

Important information about the accessories for the Biohort MiniGarage:

Important information about the accessories for the Biohort MiniGarage: Please note that the size of the MiniGarage has changed. The accessories only fit the "Model 2023 / Size L" with the dimensions 145 x 203 x 150 cm. Please check carefully that you have the correct size to be able to use the accessories properly.

  • Overview
  • Colours & Sizes
  • Standard Equipment
  • Accessories
  • Service
  • Technical Data
  • Product Enquiry



  • Rainwater-proof
  • Invisible, integrated ventilation
  • Comfortable door opening with gas spring


Quality at its best

  • Top quality materials: galvanised, polyamide enamel coated steel plate, screws and hinges made of stainless steel
  • 20-year guarantee


  • 3-way locking mechanism complete with stainless steel door handle

      Secure bicycle garage with practical details

      The MiniGarage provides the ideal storage space for up to two bicycles or gardening tools and gardening furniture, etc.

      The bicycle rail (optional, see pictures below) facilitates the storage of bikes. Place the front wheel in the guide rail, push it to the back with the bicycle seat until the front wheel is in the clamp. Done! Maximum of two bicycle rails possible.

      The shelf set (see pictures below) is ideal for storing additional bicycle accessories. It consists of two support rails and corresponding shelves – as in our garden sheds.

      Typical applications

      Shelf set
      Bicycle rail, electrical mounting panel, shelf set
      Shelf set
      Bicycle rail, electrical mounting panel, shelf set


      Metallic silver
      Metallic dark grey

      Attention: The product colours shown on the website may differ from the actual product colours! Full details about the colours can be found under Quality/Colours.

      Sizes (cm)

      Door opening: 125 x 137 cm (W x H)

      Metallic dark grey

      Organiser system

      Organiser system fitted on the inside of the door (incl. 6 hooks)

      Enjoy the benefits of the comprehensive Biohort service offering

      Assembly service

      The Biohort MiniGarage is delivered in individual parts for home assembly. Use our assembly service for quick and uncomplicated assembly.

      Request a catalogue

      Have you gained a small insight into the Biohort products here? We would be delighted to send you copies of our catalogues and look forward to your enquiry!

      Product advice

      Customer service is our top priority. With the help of our product advisers, you will get a quick and easy answer to your question. Expert personnel are available for you on all working days.

      Full Brochure German de Download 15.3 MB
      Full Brochure English en Download 8.81 MB
      Full Brochure French fr Download 9.21 MB
      Full Brochure Italian it Download 5.8 MB
      Full Brochure Spanish es Download 14.82 MB
      Full Brochure Dutch nl Download 9.21 MB
      Full Brochure Swedish sv Download 9.72 MB
      Full Brochure Norwegian no Download 8.81 MB
      Catalogue Norway en, no Download 8.81 MB
      Full Brochure Danish dk Download 8.81 MB
      Full Brochure Slovakian sk Download 15.22 MB
      Full Brochure Slovenian sl Download 19.46 MB
      Full Brochure Hungarian hu Download 8.89 MB
      Full Brochure Czech cz Download 15.23 MB
      CasaNova Brochure German de Download 1.29 MB
      Brochure CasaNova French fr Download 8.94 MB
      Brochure CasaNova Dutch nl Download 3.39 MB
      CasaNova Sauna Module German de Download 2.54 MB
      Tri-Fold Folder 2021 de Download 2.56 MB
      Minifolder en Download 4.7 MB
      Minifolder FR fr Download 1.82 MB
      Minifolder IT it Download 4.66 MB
      Gesamtprospekt NL-FR fr, nl Download 9.21 MB
      Minifolder NL nl Download 4.7 MB
      Minifolder CZ cs Download 4.66 MB
      Minifolder SK sk Download 1.83 MB
      ParcelBox 2021 de Download 3.1 MB
      Assembly Manual MiniGarage de, en, es, fr, it, nl, sv, hr, pl, da, sk, sl Download 43.82 MB
      Assembly Manual Garden Shed (Floor Frame) de, en, es, fr, it, nl, dk Download 1.15 MB
      Assembly Manual Garden Shed (Floor Panels) de, en, es, fr, it, nl, dk Download 644.87 KB
      Assembly Manual "MiniGarage L" Bicycle Rail de, en, es, fr, it, nl, sv_SE, pl, sl, sk, cs, hu, hr, da, nb Download 5.1 MB
      Assembly Manual "Bicycle Hanger" de, en, es, fr, it, nl, dk Download 1.14 MB
      Assembly Manual "Shelf System" de, en, es, fr, it, nl, dk Download 1.94 MB
      Operating Instructions LED Light de, en, es, fr, it, nl, hu Download 1.14 MB
      Point Foundation MiniGarage M de, en, es, fr, it, nl, dk, sv, no, pl, si, sk, cz, hu, hr Download 167.06 KB
      Point Foundation MiniGarage L de, en, es, fr, it, nl, dk, sv, no, pl, si, sk, cz, hu, hr Download 202.4 KB
      Concrete Foundation Plan MiniGarage M de Download 198.47 KB
      Concrete Foundation Plan MiniGarage L de Download 198.01 KB
      Parts List MiniGarage de, en, es, fr, it, nl Download 518.58 KB
      Submission Plan MiniGarage de, es, fr, it, nl, en Download 220.82 KB
      Einreichplan MiniGarage de, es, fr, it, nl, en Download 220.82 KB
      Guarantee Conditions PL pl Download 35.36 KB
      Guarantee Conditions CZ cs_CZ Download 66.76 KB
      Biohort Planting Calendar de Download 1.18 MB
      Auswahl zurücksetzen

      You can filter for show models near you in our dealer search.

      You can purchase Biohort products from our online shop or our dealers – see dealers in your area

      Goods are delivered in Switzerland exclusively via our general importer, Neogard.

      No! We provide free kerbside delivery to the following countries: Austria, Germany, France, Netherlands, Belgium, Luxembourg, Denmark, Great Britain, Ireland, Sweden, Finland, Spain, Italy, Hungary, Czech Republic and Slovenia. The pre-requisite is that the delivery address is on the mainland and that the road is passable for a 38-tonne lorry (clearance height of 4 m). The products are delivered either to the store or directly to the customer's home. If you want the product to be delivered to an island, please ask for the relevant island surcharge at

      You can find out the retail prices of our products from our numerous retail partners or in our Biohort online shop.

      Price information is available from our specialist dealers or via our online shop.

      You can order spare parts directly from our customer service department at

      Please state the product type, purchase date, your address and the spare part you need. You can download the parts list for your product to view the spare parts here.

      You can also contact the Biohort Assembly Partner covering your area directly and book the assembly appointment. In this instance, you will pay the installer directly for the service provided.

      The appointed installer will get in touch with you within three working days of the order being placed to arrange an assembly date. We guarantee an assembly date within six weeks from confirmation of your order. The courier commissioned by us will deliver the goods to your home, free kerbside, approximately one week before the scheduled assembly date.

      See our assembly terms and conditions for further information.

      The assembly service can also be booked in the online shop for Austria and Germany. The assembly flat rate fee is listed as an accessory for the respective product. Choose the relevant product size and add the assembly flat rate fee to the basket.

      See our assembly terms and conditions for further info.

      • Travelling to and from the assembly site
      • The transport of the packaged product to the assembly site (maximum 20 metres).
      • Assembly of the Biohort product incl. accessories (excluding SmartBasePLUS foundation and side canopies) from the top edge of a completed, level foundation.
      • Storm-proof anchoring depending on the product and the surface.

      See our assembly terms and conditions for further info.

      Biohort has certified independent Assembly Partners. You can find the Assembly Partner covering your area here. You can contact them directly or (for Austria and Germany) book the assembly appointment in our online shop.

      You can find the guideline assembly prices here. The assembly flat rate fee for all sizes can be found with the accessories for the product in question in our online shop. Select the desired product size and add it to the basket. The assembly terms and conditions for any assembly appointment booked in our online shop can be found here. Any additional services (e.g. disposal of the packaging, sealing of the foundation) can be agreed directly with the installer.

      Standard products in stock are delivered as quickly as possible within three weeks of placing the order. The actual delivery times for individual products are listed in our Biohort online shop.

      You can agree a fixed delivery week (calendar week). Please let us know when you place your order. However, please note that there must be at least 6 weeks between placing the order and delivery.

      We deliver the goods you order directly to the delivery address of your choice. The goods are delivered with parcel services or a shipping company, depending on weight or size. If the item is delivered by parcel services (LeisureTime Box 100/130, Parcel Box or small accessory), there is NO prior notification of delivery. 
      If your product is being delivered by a shipping company, you will be contacted by the latter as soon as your goods arrive at the delivery warehouse. You must schedule the delivery on one of the two following working days.  

      Delivery is "free kerbside", which means that the recipient is responsible for moving the goods onto their property (into the garden, for example).  The transport packaging (including any wooden crates) is retained by the recipient and will not be taken back by the shipping company, except for Euro pallets that must be returned. For delivery by a shipping company ("free kerbside"), please provide a telephone number we can use to contact you during the day. 
      Please note that the following conditions must be met for delivery by a shipping company: 

      • Minimum road width: 3 metres 

      • Vertical clearance: 4 metres 

      • Road accessible for 38-tonne lorry

      • Turning room must be available 

      Yes, however, a freight surcharge may apply for island deliveries. Please check this with

      A delivery date can only be agreed for deliveries by a shipping company. If your product is being delivered by a shipping company, you will be contacted by the latter as soon as your goods arrive at the delivery warehouse. You must schedule the delivery on one of the two following working days. The product will then be delivered during the day.

      Biohort products are delivered in individual parts in sturdy corrugated cardboard boxes for self-assembly. Only the LeisureTime Box 130/160 can be ordered in the Biohort online shop ready-assembled for destinations in Austria and Germany!

      Please note the following points for correct goods acceptance. 

      • Check against the included delivery note that you have the right number of packages and that the colour and size are correct, as well as checking each box for obvious transport damage. If you notice any irregularities, be sure to note them on the carrier's delivery receipt, or in the digital signature field ("goods damaged", "damaged", "box missing"). 

      • The driver must give you sufficient time to do this and must confirm the complaint with a signature (incl. lorry registration number). 

      • Please also accept damaged packages!  
        After examining the facts, we will replace the damaged parts free of charge and deliver them without delay. 

      • Please report any irregularities during goods acceptance within three working days, by sending us an email with photos to our customer service team at

      Please inform us of planned holidays, business trips or similar at the same time as placing your order. If you cannot accept delivery at short notice, please contact us immediately on +43 (0) 7282 77 88-0

      "Delivery free of charge" comprises the single transport from our factory to the delivery address supplied (mainland only), last kerbside, provided that the road is passable for a 38-tonne lorry. You agree on a delivery week when placing your order. You will receive telephone notification from our shipping company approximately 2-3 days before the actual delivery to inform you of the exact delivery date. Please ensure that, when placing your order, you provide a telephone number we can use to contact you during the day. Please ensure that you leave enough room for the delivery, depending on the size of product ordered.

      We offer free kerbside delivery in Austria, Germany, France, Netherlands, Luxembourg, Denmark, Great Britain, Ireland, Sweden, Finland, Belgium, Italy, Spain, Hungary and Norway. An island surcharge is applied for delivery to some islands. Please enquire about this at

      We recommend that the boxes are carried by at least two people, depending on the size and weight of the boxes.
      Please note that the delivery driver is not obliged to carry the goods to your desired storage location or assembly site. 

      Our products are intended for self-assembly and are packed and delivered in individual parts. Depending on the products, the parts are packed in one or more sturdy corrugated cardboard boxes that are clearly labelled on the outside. Additional protection in the form of wooden slats, polystyrene and plastic fleece material is provided for sensitive parts. Orders containing more than nine boxes are partly shipped with additional packaging in the form of wooden crates. The customer is responsible for disposing of all of the packaging material.

      Depending on size, the boxes are fitted with handles or recessed grips. We recommend that at least two persons carry the boxes due to their size and weight.

      One single box can weigh up to 73 kg depending on the product.

      If you do not unpack your Biohort product immediately, please ensure that the packages are stored in a dry place. Should the boxes get wet or damp, we can accept no liability for any subsequent damage to the goods. 

      The boxes should be stored horizontally on a continuous, supporting surface.  

      A pair of scissors and a pre-marked cut line appear on the boxes, indicating where the box can be opened with a utility knife. Please lift the individual components from the packaging with care (do not drag them!). 

      The SmartBase or SmartBasePLUS is a complete solution comprising adjustable feet or ground screws, a special frame and aluminium floor boards. The optional aluminium floor frame is no longer required in this instance and does not need to be fitted. The optional aluminium floor panels are also replaced by the aluminium floor boards.

      The SmartBase Foundation is the ideal foundation for uneven concrete or paved areas. It consists of high-quality aluminium floor boards, a special foundation frame and height-adjustable feet. 

      Original soil is required for the SmartBasePLUS. It is also important to ensure that the soil is free from large stones, pipes and coarse roots. Test holes should preferably be drilled in advance (e.g. using an iron rod at least 60 cm long). 

      The aluminium boards of the SmartBase foundations can withstand loads of up to 200 kg/m².

      The installation of a vapour barrier (= a water-impermeable plastic film with a minimum thickness of 150 µ) is highly recommended, as it protects against rising ground moisture. It is important to ensure that the membrane is not larger than the garden shed surface area. Please refer to our foundation tips for further details. .

      If you have not yet considered incorporating a vapour barrier in the foundation, it can also be retrofitted inside the shed using the aluminium floor frame: Spread out the vapour barrier and pull it slightly up the side on the aluminium floor frame. Then lay the XPS hard foam panels on top followed by the aluminium floor panels (or another suitable floor). Finally, trim the protruding membrane to lie flush with the upper edge of the aluminium floor frame.

      The recommended foundation dimensions can be found in the technical data for the respective product. If you are erecting a new concrete or point foundation, please refer to our concrete foundation plans and point foundation plans.

      A foundation must be erected for the Garden Sheds, Equipment Locker and the MiniGarage. Please refer to our foundation tips.

      A level, solid hard surface is required for the WoodStock, StoreMax and HighBoard products as well as for the Romeo Patio Locker. These products must be anchored to this hard surface with the screws and dowels supplied.

      The outdoor boxes (LeisureTime Box and LoungeBox) must also be installed on a level, solid surface. These products do not need to be secured to the ground.

      The Raised Vegetable Bed, Belvedere Planting Bed, DaVinci and MonAmi Composter can be installed on all level surfaces.

      The various foundation options are described in detail in our foundation tips.

      Biohort products must be installed on an absolutely level surface. There must be no incline. Various suitable foundation options are available. Click here for our foundation design tips .

      The fastening material (screws and dowels or also anchors with the aluminium floor frame) is supplied. Biohort cannot accept any liability for damage caused by insufficiently secured products.

      A floor frame is required in the following situations: Point foundation, inadequate* concrete slab, paved or concrete foundation without step.

      The floor frame provides a continuous bearing surface for the floor profile (joints, coarse subsoil) and makes it easier to incorporate the sealing joint.

      *inadequate: minimally uneven, coarse subsoil

      Click here for more foundation tips: Foundation tips.

      No specific specialist skills are required for assembly. A detailed assembly manual is supplied with our products. You can download the assembly manual in advance from our website.

      Specific socket and open-ended spanners are supplied. The following additional tools and aids are required or could be useful:

      • A sharp knife for opening the box
      • Flat-bladed and Phillips head screwdrivers
      • Combination wrench, 13 mm opening
      • Percussion drill with Ø 10 mm masonry drill (for fastening anchors)
      • Retractable tape measure
      • Stepladder
      • Spirit level
      • Cordless screwdriver (useful)
      • Folding trestles x 2 (useful)
      • Socket set (useful)

      To avoid scratches, please also ensure that a suitable support surface is used for assembly.

      As the garden sheds and the equipment locker should be sealed on the surface that meets the foundation, we recommend a suitable sealant. This silicone-like compound should be acid-free and suitable for outdoor use.

      This depends on a few factors:

      • The skill of the "assemblers" and how many there are of them
      • The weather conditions (never build in windy weather!)
      • The space situation (at least 70 cm of space all-around)

      Because we have years of experience, however, we can give guideline values. Please note that these estimates relate purely to the time taken for the work. Please read the assembly manual beforehand, including all notices. 

      Europa Garden Shed:

      3 to 6 hours (depending on size)

      Neo Garden Shed:

      6 to 12 hours (depending on size)

      HighLine/Panorama/AvantGarde Garden Shed:

      5 to 8 hours (depending on size)
      HighLine/Neo Side Canopy: 4 hours
      Equipment Locker: 2 to 3 hours
      MiniGarage: 2 to 3 hours
      HighBoard: 1 to 2 hours
      Romeo Patio Locker: 2 to 3 hours
      LoungeBox: 1 to 2 hours
      Alex: 0.5 to 2 hours
      LeisureTime Box/ParcelBox: 0.5 to 2 hours


      0.5 to 1.5 hours
      WoodStock: 1.5 hours

      Raised Vegetable Bed/Belvedere:

      10 minutes
      DaVinci: 0.5 to 3 hours (depending on size)
      MonAmi Composter: 30 minutes
      Charly Robotic Lawn Mower Garage: 1 hour
      SmartBasePLUS Foundation: 3 to 5 hours (depending on size)
      Privacy Screen: 2 to 4 hours 
      (Attention: The type of concrete is not taken into consideration. Please ask the manufacturer for setting time information!)
      BikeLift: 1 hour

      At least two people are needed to assemble the Biohort products.

      The detailed product assembly manual is supplied. This can also be downloaded from our website.

      Check the delivered goods for completeness (size, colour, number) and possible damage. Ensure that you have enough space (at least 70 cm around the foundation) and helpers to assist with the assembly. You are advised to read the assembly manual in advance.

      Biohort has certified independent Assembly Partners. You can find the Assembly Partner covering your area here. You can contact them directly or (for Austria and Germany) book the assembly appointment in our online shop. The assembly terms and conditions for any assembly appointment booked in our online shop can be found here.

      An even, level hard surface is essential for successful assembly. Leave a space of at least one metre all around the assembly area. Please open the boxes as noted on the boxes themselves. Should any parts be damaged, do not fit them, but inform customer services immediately, enclosing photos.  

      Please place the individual parts on suitable surfaces/supports to avoid scratches. Wear gloves during assembly - some parts may have sharp edges. 

      Sealants are available from various manufacturers. It is important to ensure that they are suitable for outdoor use and do not attack the metal parts (acid-free). Appropriate products are available from builders' merchants. The sealant can be used to seal the foundation depending on the hard surface. Please refer to our foundation tips.

      The sealant is used to seal the bearing surface of the floor profile (or floor frame) and foundation to prevent rainwater seeping into the garden shed. See our foundation tips for more detailed information.

      The foundation must be absolutely level for the successful assembly of our products.  

      With the Biohort SmartBasePLUS foundation for slopes and lawns, it is possible to compensate for a slope of 15 cm. Extension sets for the ground screws can also be provided on request, to achieve compensation of max. 55 cm overall.  

      Please note that with this foundation, only one side of the shed can be raised. The foundation screws are not suitable for raising the entire shed. 

      On a firm surface, the SmartBase can compensate for a slope of up to 4 cm.  

      See our Foundation Tips for more detailed information. 

      Safety advice for each product can be found on the opening pages of the assembly manual.

      Keep all small parts or packaging materials supplied away from small children during assembly. Some components have sharp edges or protrude. This should be borne in mind when assembling the product and during daily use. Gloves are included and can be used if necessary.  

      Note that relatively high temperatures may develop in the garden shed (heat generation similar to that in a car). Find out the storage conditions for the products stored in the garden shed from the respective manufacturers.    

      The aluminium rail must be examined before use to check that it is dry.  
      Other people should also be prevented from standing in the danger area when you are using it. Children may only use the BikeLift under adult supervision.

      Biohort products are Faraday cages, meaning that lightning protection is not required. The Faraday cage is an enclosure comprising an electrical conductor (e.g. wire mesh or sheet metal) that is closed on all sides and acts as an electrical shield. In the event of external static or quasi-static electrical fields, the inner section remains unaffected because of the shield effect.

      The roof of the garden sheds is designed to withstand a max. snow load of 150 kg/m² (CasaNova 215 kg/m²). However, roof avalanches can cause damage to the roof.

      Our correctly assembled and properly anchored garden sheds are successfully tested in a wind tunnel at wind speeds of up to 150 km/h.  

      Please make sure that they are properly anchored to the ground. Biohort cannot accept any liability for damage caused by insufficiently secured products, or lids/doors that are not locked. 

      The Biohort storage solutions are all lockable and are therefore classed as "lockable containers" for insurance purposes. The Panorama, HighLine, AvantGarde and Neo Garden Sheds as well as the CasaNova Outbuilding are the most secure against burglary.

      What is classed as burglary?
      A burglary is theft accompanied by break-in. This occurs when the perpetrator gains access to insured premises by using force, tools, unlawfully produced keys or keys previously taken from another insured premises by burglary or robbery in order to steal insured items. A burglary also occurs if the perpetrator enters or creeps into insured premises by overcoming difficult obstacles or gains entry through openings not intended for access. Finally, entry into locked containers and the theft of items contained therein also constitutes burglary.

      Biohort products need very little care due to the high-quality materials used and careful workmanship. Simply lubricate the lock and hinges every year and regularly clean the StoreMax sliding rails or treat them with silicone spray. In the event of soiling due to weather and environmental conditions, clean using just water and the Biohort CleanLine Universal Cleaner. A high-pressure cleaner can also be used (maintain a distance of at least 10 cm between the lance and the lacquer. Do not use a steam cleaner. Max. pressure approximately 80 bar). To preserve the lacquer surface, we recommend Biohort CleanLine Preservation, which provides the lacquer surface with optimum protection against weather and environmental conditions. 

      The gutter should be cleaned several times a year, to ensure optimum drainage. If the gutter is blocked, it may overflow. No liability can be accepted for any resultant damage.  

      IMPORTANT: Sea air/ambient air containing salt water and/or salt, aggressive and abrasive cleaning agents, road salt, fertilisers, fresh concrete, screed materials and other chemical substances (never store this type of product in the open) can attack the lacquer and zinc surface, thereby leading to corrosion. Warranty claims are no longer valid in such cases. 

      On all magnetic elements inside the garden shed (e.g. on the roof beams).

      The LED light is attached using a magnetic strip.

      The screw size for this is minimally variable. The size of the sheet metal screws should range from 3.2 to 3.9 mm. The holes for inserting cables are 22 mm in diameter.

      Garden shedsmax. 6 pcs.
      MiniGaragemax. 6 pcs.
      HighBoard 200max. 4 pcs.

      Yes, both the bicycle hanger of MiniGarage M and the bicycle rail of MiniGarage L are suitable for e-bikes. 

      During the winter, it can generally be assumed that the temperature inside the product will equate to the outside temperature as there is no insulation.

      Biohort products can heat up on exposure to prolonged sunlight in the same way as cars. Regular ventilation is required in this respect in order to regulate the temperature.

      Biohort products do not emit any sounds on exposure to cold and heat as the steel plate has a very low material expansion coefficient (considerably lower than aluminium, plastic or concrete, etc.).

      Only products with a door handle (Neo/HighLine/AvantGarde/Panorama) can be incorporated into a keyed alike system or replaced with a new cylinder lock. The cylinder for the mortise lock is 54 mm long with a central division (27 mm each).

      All accessories fitted inside the garden sheds or boxes can easily be retrofitted.

      Biohort products are subject to the DIN 4102 standard and are classified according to building material rating A1 under products without combustible components.

      Roof overhang (mm)
      Model / sizefrontrearrightleft
      HighLine HS/H1100
      HighLine H2
      HighLine H3
      HighLine H4
      HighLine H5
      Panorama P116080100
      Panorama P2
      Panorama P3
      Panorama P4
      Panorama P5
      AvantGarde A1, A2, A3, A43907030
      AvantGarde A5, A6
      AvantGarde A7
      AvantGarde A8
      Europa 120100
      Europa 2
      Europa 2A
      Europa 3
      Europa 4
      Europa 4A
      Europa 5
      Europa 6
      Europa 7
      Equipment Locker 9015
      Equipment Locker 150
      Equipment Locker 230
      Romeo M, L Patio Locker10
      Woodstock 150220220
      WoodStock 230
      CasaNova 3 x 2140
      CasaNova 3 x 3
      CasaNova 3 x 4
      CasaNova 3 x 5
      CasaNova 3 x 6
      CasaNova 4 x 2
      CasaNova 4 x 4
      CasaNova 4 x 5
      CasaNova 4 x 6

      The external, internal and foundation dimensions can be found either in the last few pages of the Biohort brochure (technical details) or online. To view this data, click on the desired product on the Biohort website and then go to technical details. You can also download the respective submission plan and foundation plan.

      ATTENTION: The exterior dimensions always include the roof overhang and the height shown is the highest point of the product.

      No rainwater downpipe is provided or required for the Equipment Locker and MiniGarage. The inner roof supports contain a polystyrene insert that curves upwards such that the roof is slightly curved. This allows the water to run off evenly on all sides.

      Biohort uses only the best material for all its products. Biohort products are made from high-quality, galvanised, polyamide enamel coated steel from Austria and Germany. Premium car manufacturers such as Mercedes-Benz, BMW or Audi have relied on the high quality of these renowned steel producers for years. This is the reason why we can offer our customers a 20-year guarantee against corrosion with a clear conscience. Individual components are made from aluminium.

      Biohort products are rainwater-proof.

      Passive ventilation is provided for in our Biohort products, except for the CasaNova Outbuilding. In this case, the acrylic glass panel can be opened on two sides for ventilation purposes. ATTENTION: This sliding function is not included in the double version of the acrylic glass skylight, which is available as an option.

      During assembly, make sure that a vapour barrier is installed to prevent rising soil moisture (see foundation design). In the case of high humidity and large temperature fluctuations, condensation can nevertheless form on the inside of the roof overnight. This is due to physical reasons, but can be avoided by insulating the inside of the roof with polystyrene panels/XPS hard foam panels (thickness: 2 cm for Europa and AvantGarde; 3 cm for HighLine, Panorama, Equipment Locker and MiniGarage). These panels are available from all builders' merchants. Garden sheds in the AvantGarde, Panorama and HighLine series are designed for interior roof insulation as are the Equipment Locker and the MiniGarage. We are pleased to provide fixing material for the Europa model. Please write to us at

      As with other outdoor items (garden furniture, window ledges, etc.), there is also a certain amount of noise in garden sheds when it rains. How aware you are of this is heavily dependent on personal perception, however, and can vary. 

      You can insulate our garden sheds to deaden the noise. Garden sheds in the AvantGarde, Panorama and HighLine series are designed for interior roof insulation. Fixing material can be supplied for garden sheds in the Europa series. Please complete the spare part request form here on our website. Our customer service will then contact you and prepare a quote, as necessary. 

      Our tip: You are welcome to visit the showrooms of our retail partners and get an idea of what our products look like.  

      The products can be installed on a roof terrace if building regulations are met.

      IMPORTANT:Ensure that products are anchored securely in case of stormy weather (fixing material supplied). Biohort cannot accept any liability for damage caused by insufficiently secured products.

      Biohort products are not designed to house animals.

      The optional aluminium floor frame can also be retrofitted with a little extra time and effort.

      The hinge for the Europa Garden Shed, Equipment Locker and WoodStock can be chosen during assembly. A left-sided hinge can be ordered for the standard door on request and at additional cost for the AvantGarde, Panorama and Highline Garden Sheds (stainless steel door handle).
      The door opening cannot be changed on the Neo Garden Shed, the MiniGarage and the Romeo Patio Locker.

      Biohort colours do not correspond to any RAL number but some of them share similar features to RAL numbers. We recommend that you view the original colour samples at our dealers. If you wish, you can also request a colour sample chart from Biohort.


      This colour is not similar to a RAL colour


      Similar to RAL 6005

      Metallic quartz grey

      Similar to RAL 7039

      Metallic silver

      Similar to RAL 9006

      Metallic dark grey

      Similar to RAL 7016

      Grey white (interior colour)Similar to RAL 9002
      Metallic bronzeThis colour is not similar to an RAL number

      All Biohort products are supplied with different locks. Depending on the product group, the locks can be subsequently ordered with a uniform lock provided that the respective products have an identical lock design. Contact our Customer Service team for further information (

      The optional aluminium floor frame (= 40 x 40 mm tube-shaped aluminium frame) is an ideal addition, regardless of the type of foundation chosen. The floor frame is required with a gravel base, concrete slabs/paving as well as with a point or strip foundation. The floor frame is not mandatory with a smooth, level concrete foundation (without step). It is, however, recommended as it facilitates sealing or application of the sealing joint.

      EXCEPTIONS: The aluminium floor frame cannot be used in conjunction with the SmartBase foundations and with the concrete foundation with lateral graduation (stepped border or water barrier). See the foundation tips for further information.

      The optional aluminium floor panel (= 2 mm chequer plate) can only be used in conjunction with the optional aluminium floor frame. Please note that the aluminium floor panel must be fully lined with a 2-3 cm thick XPS hard foam panel. The hard foam panels are not supplied but are available from builders' merchants.

      The intermediate floor is included among the items supplied for DaVinci. The planter insert is available as an optional accessory.  

      Yes, retrofitting is possible here. The Privacy Screen and Trellis can be ordered directly from our online shop, or from one of our retail partners.  

      There is a risk of tipping over in storms and strong winds, so professional anchoring is necessary. To allow anchoring, mounting brackets are supplied with the connecting or end uprights.

      No, these two items are not compatible with the DaVinci.

      Yes you can. Please complete the spare part request form on our website. Our customer service will contact you as soon as possible and prepare a quote, as necessary.

      Biohort uses only the best materials for all its products. Biohort products are made from high-quality, galvanised, polyamide enamel coated steel from Austria and Germany. Premium car manufacturers such as Mercedes-Benz, BMW or Audi have relied on the high quality of these renowned steel producers for years. This is the reason why we can offer our customers a 20-year guarantee against corrosion with a clear conscience. Individual components are made from aluminium.

      No support rails are required to assemble the shelves in the Neo garden shed. The shelves are attached to the side wall suspension devices. This is also possible if interior panelling and insulation are used. 

      The insulation and the gap between the electric assembly panel and the side wall are both 40 mm wide. To use the electric assembly panel, there must either be no insulation here, or the cable runs must be cut out.

      With the Neo garden shed, you can decide during assembly whether to attach the outlets for roof drainage on both sides at the front or back. The structure is then modified accordingly, so that there is a slope towards the outlets. The supplied rainwater downpipes are then fitted at these outlets.  

      The hose connection option is not available with this garden shed. If you want to direct the water further away, you could attach a Polo-kal pipe (PVC pipe, 5 cm in diameter) to the end of the outlet elbow.  

      The dimensions of the rainwater downpipe outlet elbow are 4.4 x 4.4 cm.

      Please prepare the power supply when creating the foundation. Alternatively, a cable can be run through the corner joint of the floor frame and moved to the desired position between the panel and the top profile. 

      The side canopy can only be attached to the side with the integrated gutter. This means that no more than one side canopy can be fitted on the left and on the right.
      It is not technically possible to install a side canopy from other shed sizes, so you must always order the size of side canopy that corresponds to the garden shed.  

      Since 2022, a narrow side canopy for each size of garden shed has also been available to all those who prefer a smaller version of the extension: 

      S: 414 cm 
      L: 548 cm 

      The BikeLift can be used for various wheel types, including e-bikes. But please note the following dimensions:

      Max. tyre width: 77 mm 
      Max. front tyre diameter: 74 cm (29") 
      Max. weight: 30 kg 

      The end of the back mudguard or luggage carrier should not protrude beyond the tyre:

      The BikeLift can be mounted on a covered building wall (brickwork, concrete, wood) in just a few easy steps, or installed with a suspension rail in a Biohort garden shed. Enough space must be allowed when using the swivel mount.  

      Let us know which variant you require when you order!  

      *Europa garden shed: 
      Please make sure that you fit the BikeLift at the highest point in the Europa garden shed (centrally on the back wall). If you want to attach several BikeLifts, please note that the size and length of the bicycles must not exceed the lowest interior clearance height, less 15 cm (for safety).  

      A padlock (with a combination lock) is among the items supplied. The holes for attaching it are already pre-drilled. For safety reasons, this must be attached if the BikeLift is not being used.

      If there is no bicycle hooked into the BikeLift, it must be locked at the bottom with the padlock. This stops the carriage suddenly moving upwards if unintentionally activated. Attention: Risk of injury!

      Basically yes, but please ensure that the rear tyre of each bicycle is always on the ground.

      Our 20-year guarantee offers protection against corrosion of metal parts and for defective or unusable parts. The following are not covered by the guarantee: transport damage (the shipping company is liable for this damage), damage due to faulty foundations and/or aggressive environmental conditions (due to chlorine, salt, acid, etc.,) and indirect or consequential damage. Only the statutory 24-month warranty period applies for wear, moving parts, colour changes, and electrical, plastic and rubber parts. Details of our guarantee conditions can be found here.

      Electrical installations (such as lighting and power supply, etc.) are generally permitted. Please note that such installations should only be carried out by a licensed specialist. An appropriate power cable should be considered when laying the foundation.

      If this is not done and a cable has to be retrofitted, the cable can be laid into the shed through the front, semi-circular corner cladding (Panorama, AvantGarde and Highline Garden Sheds).

      Retrofitting is not possible with the Neo and Europa Garden Sheds or the CasaNova Outbuilding. Please ensure that you plan for a power supply when laying the foundation. If this is not done and a line has to be retrofitted, either the floor frame or a wall panel will have to be drilled in order to bring the cable into the shed or outbuilding. Please note that this will invalidate the guarantee.

      With the MiniGarage, the power cable can be pulled through one of the rear corner claddings as there is a small perforation in each corner (bottom). The HighBoard 200 has perforations in the floor and within the back wall. These can be pressed-in to insert the cables. We offer an electric mounting panel for the straightforward installation of switches, sockets and the like in the Garden Sheds, Equipment Locker, MiniGarage and the HighBoard 200.

      Biohort products are available in the colours specified. Special paint finishes are not available due to serial production.

      Please note that independent recolouring/repainting the products will invalidate the manufacturer's warranty.

      Yes the aluminium floor panels can be easily retrofitted. However, the aluminium floor frame is essential. We recommend underlying the aluminium floor panels with XPS hard foam panels 2-3 cm thick.

      Biohort products are made from high-quality steel plate and aluminium, and are therefore 99% recyclable.

      Replacement keys for the stainless steel door handle with standard cylinder lock (CasaNova, Neo, Panorama, HighLine, AvantGarde from the 2016 model onwards) can be ordered from a locksmith on presentation of the original key. Please therefore keep one of the three keys supplied in a safe place. If a key is no longer held in stock, the integrated cylinder must be drilled.

      Keys for the T-handle cylinder lock or T-bar cylinder lock (Europa Garden Shed, Equipment Locker, Romeo Patio Locker, MiniGarage, WoodStock, StoreMax, HighBoard, LoungeBox, LeisureTime Box, Alex) can be reordered through the company Carney in Germany. The lock number (engraved on the lock) must be stated.

      Carney can be contacted at:

      CARNEY GmbH
      Westerwaldstr. 96
      57299 Burbach | Germany
      Tel. +49 2736 3562

      You can buy accessories directly from our online shop.

      Please complete our complaints form on our website. Our customer service will then get in touch with you.  

      To be able to process the complaint properly, we need the following data: 

      • Biohort order number (A-xxxxxxx) or a copy of the invoice

      • informative photos

      • part designation based on the parts list or assembly manual 

      We ask you not to install damaged parts without clarification. 


      Data sheet

      Exterior dimensions
      W x L x H (cm)
      Interior dimensions
      W x L x H (cm)
      Foundation dimensions
      W x L (cm)
      EAN code
      metallic silver
      EAN code
      metallic dark grey
      145 x 203 x 151 140 x 195 x 143.5 145 x 203 97.5 9003414 55040 7 9003414 56040 6


      Packed in three boxes, easily understandable assembly manual included.

      Are you interested in our MiniGarage?

      We would be delighted to talk to you and answer any questions. We look forward to your enquiry!

      These products may also be of interest to you

      Similar products