Romeo

The ideal outdoor cabinet for balcony and terrace

Slim exterior and voluminous interior
The Romeo® Patio Cabinet creates space without needing much space for itself. Moreover, it spoils all balcony and patio fans with an individual shelf range, soft-closing doors due to gas springs and many more details typical for Biohort!

  • Overview
  • Colors & Sizes
  • Standard Equipment
  • Accessories
  • Service
  • Technical Data
  • Product Enquiry

Advantages

  • Rainwater-proof
  • Invisible, integrated ventilation
  • Comfortable lid and door opening with gas spring
  • 3-way locking mechanism with T-handle cylinder lock
  • Maintenance-free for life
  • Top quality materials: galvanised, polyamide enamel coated steel plate, screws and hinges made from stainless steel

More space for the essentials

The Romeo® Patio Outdoor Locker creates space without needing much space for itself. Moreover, it spoils all balcony and patio fans with an individual shelf range, soft-closing doors due to gas springs and many more details which are typical for Biohort!

Colors

Metallic silver
Metallic quartz gray
Metallic dark gray

Sizes (in)

Shelves/support rails

Two galvanised steel shelves and three support rails. The shelves can therefore be installed either under one another or side by side.

Organiser system

Fitted inside the door (incl. 6 hooks)

Enjoy the benefits of the comprehensive Biohort service offering

Product advice

Customer service is our top priority. With the help of our product advisers, you will get a quick and easy answer to your question. Expert personnel are available for you on all working days.

A pair of scissors and a pre-marked cut line appear on the boxes, indicating where the box can be opened with a utility knife. Please lift the individual components from the packaging with care (do not drag them!). 

Our products are intended for self-assembly and are packed and delivered in individual parts. Depending on the products, the parts are packed in one or more sturdy corrugated cardboard boxes that are clearly labelled on the outside. Additional protection in the form of wooden slats, polystyrene and plastic fleece material is provided for sensitive parts. Orders containing more than nine boxes are partly shipped with additional packaging in the form of wooden crates. The customer is responsible for disposing of all of the packaging material.

If you do not unpack your Biohort product immediately, please ensure that the packages are stored in a dry place. Should the boxes get wet or damp, we can accept no liability for any subsequent damage to the goods. 

The boxes should be stored horizontally on a continuous, supporting surface.  

One single box can weigh up to 161 lbs. depending on the product.

Depending on size, the boxes are fitted with handles or recessed grips. We recommend that at least two persons carry the boxes due to their size and weight.

A foundation must be erected for the Storage Sheds and the Equipment Locker. Please refer to our foundation tips.

A level, solid hard surface is required for the HighBoard as well as for the Romeo Patio Locker. These products must be anchored to this hard surface with the screws and dowels supplied.

The outdoor boxes (LeisureTime Box, LoungeBox and StyleBox) must also be installed on a level, solid surface. These products do not need to be secured to the ground.

These products are supplied with a galvanised, coated metal base and an even, level, solid surface is required for installation. Asphalt driveways, concrete slabs in a gravel base as well as a frost-proof concrete foundations are suitable for this purpose. The boxes must be anchored to the hard surface with the fixing material supplied (screws and dowels) to ensure storm-proof installation. The surface area must be at least of the dimensions specified.

The foundation must be absolutely level for the successful assembly of our products.  

With the Biohort SmartBasePLUS foundation for slopes and lawns, it is possible to compensate for a slope of 5.9". Extension sets for the ground screws can also be provided on request, to achieve compensation of max. 21.6" overall.  

Please note that with this foundation, only one side of the shed can be raised. The foundation screws are not suitable for raising the entire shed. 

On a firm surface, the SmartBase can compensate for a slope of up to 1.5".  

See our Foundation Tips for more detailed information. 

An even, level hard surface is essential for successful assembly. Leave a space of at least 27.5" all around the assembly area. Please open the boxes as noted on the boxes themselves. Should any parts be damaged, do not fit them, but inform customer services immediately, enclosing photos.  

Please place the individual parts on suitable surfaces/supports to avoid scratches. Wear gloves during assembly - some parts may have sharp edges. 

Check the delivered goods for completeness (size, color, number) and possible damage. Ensure that you have enough space (at least 27.5" around the foundation) and helpers to assist with the assembly. You are advised to read the assembly manual in advance.

The detailed product assembly manual is supplied.

This depends on a few factors:

  • The skill of the "assemblers" and how many there are of them
  • The weather conditions (never build in windy weather!)
  • The space situation (at least 27.5" of space all-around)


Because we have years of experience, however, we can give guideline values. Please note that these estimates relate purely to the time taken for the work. Please read the assembly manual beforehand, including all notices. 

Europa Storage Shed:

3 to 6 hours (depending on size)

HighLine/AvantGarde Storage Shed:

5 to 8 hours (depending on size)
HighLine Side Canopy: 4 hours
Equipment Locker: 2 to 3 hours
HighBoard: 1 to 2 hours
Romeo Patio Locker: 2 to 3 hours
LoungeBox: 1 to 2 hours
Alex: 0.5 to 2 hours
StyleBox: 20 minutes
LeisureTime Box: 0.5 to 2 hours
SmartBasePLUS Foundation: 3 to 5 hours (depending on size)

Specific socket and open-ended wrenchs are supplied.

The following additional tools and aids are required or could be useful:

  • A sharp knife for opening the box
  • Standard and Phillips head screwdrivers
  • Combination wrench, 13 mm opening Hammer drill with 10 mm masonry drill (for fastening anchors)
  • Tape measure
  • Stepladder
  • Level
  • Cordless screwdriver (useful)
  • Saw horse x 2 (useful)
  • Socket set (useful)

No specific specialist skills are required for assembly. A detailed assembly manual is supplied with our products.

The Biohort storage solutions are all lockable and are therefore classed as "lockable containers" for insurance purposes. The HighLine and AvantGarde Storage Sheds as the most secure against burglary.

What is classed as burglary?
A burglary is theft accompanied by break-in. This occurs when the perpetrator gains access to insured premises by using force, tools, unlawfully produced keys or keys previously taken from another insured premises by burglary or robbery in order to steal insured items. A burglary also occurs if the perpetrator enters or creeps into insured premises by overcoming difficult obstacles or gains entry through openings not intended for access. Finally, entry into locked containers and the theft of items contained therein also constitutes burglary.

Our correctly assembled and properly anchored storage sheds are successfully tested in a wind tunnel at wind speeds of up to 95 mph.  

Please make sure that they are properly anchored to the ground. Biohort cannot accept any liability for damage caused by insufficiently secured products, or lids/doors that are not locked. 

Safety advice for each product can be found on the opening pages of the assembly manual.

Basically: 
Keep all small parts or packaging materials supplied away from small children during assembly. Some components have sharp edges or protrude. This should be borne in mind when assembling the product and during daily use. Gloves are included and can be used if necessary.  

Note that relatively high temperatures may develop in the storage shed (heat generation similar to that in a car). Find out the storage conditions for the products stored in the storage shed from the respective manufacturers.   

Biohort products need very little care due to the high-quality materials used and careful workmanship. Simply lubricate the lock and hinges every year. A high-pressure cleaner can be used (maintain a distance of at least 3.9" between the lance and the lacquer. Do not use a steam cleaner. Max. pressure approximately 1160 psi).

The gutter should be cleaned several times a year, to ensure optimum drainage. If the gutter is blocked, it may overflow. No liability can be accepted for any resultant damage.  

IMPORTANT: Sea air/ambient air containing salt water and/or salt, aggressive and abrasive cleaning agents, road salt, fertilisers, fresh concrete, screed materials and other chemical substances (never store this type of product in the open) can attack the lacquer and zinc surface, thereby leading to corrosion. Warranty claims are no longer valid in such cases. 

Biohort colors do not correspond to any RAL number but some of them share similar features to RAL numbers. We recommend that you view the original color samples at our dealers.

White

This color is not similar to a RAL color

Green

Similar to RAL 6005

Metallic quartz gray

Similar to RAL 7039

Metallic silver

Similar to RAL 9006

Metallic dark gray

Similar to RAL 7016

Gray white (interior color) Similar to RAL 9002
Metallic bronze This color is not similar to an RAL number

The Storage Sheds and Equipment Locker are designed to be free-standing (secured to a hard surface). We can provide the appropriate wall mounting parts for the Equipment Locker and the Europa Storage Shed on request (already supplied with Europa size 2A and 4A). We recommend additional fastening to the floor despite attachment to the wall.

The Romeo Patio Locker has perforated holes at the rear - hence it can be fastened to a wall as well as the floor.

There is no wall fastening for the HighLine and AvantGarde Storage Sheds.

Please note that we accept no liability for inadequate fastening.

The products can be installed on a roof terrace if building regulations are met.

IMPORTANT:Ensure that products are anchored securely in case of stormy weather (fixing material supplied). Biohort cannot accept any liability for damage caused by insufficiently secured products.

Biohort products provide protection against driving rain and are therefore ideal to store/stow away garden and leisure items.

LeisureTime Box/LoungeBox/StyleBox:
The floor of these outdoor boxes can withstand an even load of 44 lbs. We recommend placing an XPS hard foam panel with a thickness of 1" underneath the box in order to store heavier objects (inside the adjustable feet).

HighBoard/Patio Locker:
These storage boxes are delivered with a base plate underlay. A full surface load of up to 44 lbs can therefore be applied.

Please note that Biohort storage boxes such as the LeisureTime Box, Romeo Patio Locker, HighBoard, StyleBox and LoungeBox offer secure storage against driving rain. However, there are ventilation slits for air circulation. Seat covers/cushions/blankets absorb any humidity and should therefore not be stored in the outdoor boxes in winter due to the risk of mould stains.

LeisureTime Box/LoungeBox:
4–6 plastic feet are mounted depending on the size of the storage box. These are not height-adjustable.

StyleBox:
The adjustable feet are height-adjustable from 0.4" to 1.1".

HighBoard:
The height of both feet can be adjusted up to 0.7" on the front left and right. As the floor panel should rest entirely on the hard surface, feet height can be adjusted only for precise alignment.

Romeo Patio Locker:
The feet can be adjusted by up to 0.9" on the inside.

Biohort products are rainwater-proof.

Passive ventilation is provided for in our Biohort products, except for the CasaNova Outbuilding. In this case, the acrylic glass panel can be opened on two sides for ventilation purposes. ATTENTION: This sliding function is not included in the double version of the acrylic glass skylight, which is available as an option.

Biohort products can withstand the following surface loads when applied evenly:

Highline, AvantGarde and Europa Storage Sheds, Equipment Locker: 31 psf
HighBoard, LoungeBox, LeisureTime Box, Romeo, Alex, StyleBox: 66 lbs.

Biohort products are subject to the DIN 4102 standard and are classified according to building material rating A1 under products without combustible components.

During the winter, it can generally be assumed that the temperature inside the product will equate to the outside temperature as there is no insulation.

Biohort products can heat up on exposure to prolonged sunlight in the same way as cars. Regular ventilation is required in this respect in order to regulate the temperature.

Biohort products do not emit any sounds on exposure to cold and heat as the steel plate has a very low material expansion coefficient (considerably lower than aluminium, plastic or concrete, etc.).

Replacement keys for the stainless steel door handle with standard cylinder lock (HighLine and AvantGarde from the 2016 model onwards) can be ordered from a locksmith on presentation of the original key. Please therefore keep one of the three keys supplied in a safe place. If a key is no longer held in stock, the integrated cylinder must be drilled.

Data sheet

Size

Exterior dimensions
W x L x H (in)
Interior dimensions
W x L x H (in)
Volume
(gal.)
Weight
(lbs)
EAN code
metallic silver
EAN code
metallic quartz gray
EAN code
metallic dark gray

M

52 x 22.4 x 55.1 50 x 18.1 x 53.1

211.4

150.2

9003414 55070 4

9003414 58070 1

9003414 56070 3

L 52 x 34.3 x 55.1 50 x 29.9 x 53.1 343.5 180.6 9003414 55080 3 9003414 58080 0 9003414 56080 2

 

Packed in three boxes, photo-illustrated assembly manual included.

Are you interested in the Romeo Patio Locker?

We would be delighted to talk to you and answer any questions. We look forward to your enquiry!

Das könnte Sie auch interessieren

Ähnliche Produkte