Equipment Locker

Highly versatile Equipment Locker

Quantity:
from £ 699.00
Incl. 20 % VAT, price valid in GB
Free Shipping within 3 weeks
  • Offers a lot of storage room in a small compact space
  • Double the sheet steel thickness compared to low-cost providers
  • Lockable and rainwater-proof
  • Standard double doors provide generous access.

  • Maintenance free for life - 20-year guarantee!


Note: The colour green is being withdrawn from the range and is only available in limited quantities.

  • Overview
  • Colours & Sizes
  • Standard Equipment
  • Accessories
  • Service
  • Technical Data
  • Product Enquiry

Advantages

  • Invisible, integrated ventilation
  • Rainwater-proof

Security

  • 2-way locking mechanism with T-handle cylinder lock
  • Robust roof construction for a snow load of up to 150 kg/m²
  • Storm-proof up to wind force 12 (according to the Beaufort scale: hurricane)*
    * with professional assembly and anchoring
  • Fireproof

    Quality at its best

    • Top quality materials: galvanised, polyamide enamel coated steel plate, screws and hinges made of stainless steel
    • Maintenance-free for life
    • 20-year guarantee
    • Extensive range of standard equipment

      Attractive and Highly Versatile Locker

      Where room is scarce, the Equipment Locker shows its value. In the garden, on the terrace, in the garage or on the balcony it organises and stores your tools without restricting your living space. With the Biohort Equipment Locker you can store garden equipment, barbecue grills, garden furniture, and other similar items protected from rain and theft. It blends harmoniously into its location thanks to seven different sizes and its elegant design.

      Colours

      Attention: The product colours shown on the website may differ from the actual product colours! Full details about the colours can be found under Quality/Colours.

      Metallic silver
      Metallic quartz grey
      Metallic dark grey
      Dark green

      Sizes (in cm, exterior dimensions)

      Door opening: 

      • Size 90: 65 x 170 cm (W x H),
      • Sizes 150 – 230: 135 x 170 cm (W x H)

      Double Depth Sizes (in cm, exterior dimensions)

      Door opening: 

      135 x 170 (W x H)

      Shelves / support rails

      Comprising two shelves (length: 24.5 cm, width: 72 cm) and two support rails.

      • Made from galvanised steel plate
      • Max. load 15 kg per shelf
      • Easy to retrofit

      Additional shelf sets and support rails are also available separately as accessories.

      Tool hangers

      Designed to hang up spades, rakes and garden hoses, etc.

      Standard equipment: 4 pcs.

      Additional tool hangers are available separately as accessories

      Organiser system

      • Organiser system fitted on the inside of the door to hang tools
        and small garden tools.
      • Three hooks included per door panel

      T-handle cylinder lock

      • 2-way locking mechanism prevents unwanted entry
      • The door construction is extremely robust.
      • Insurance cover through home insurance policy
      • Incl. spare key

      Ventilation slots

      Ensure adequate air circulation

      Door hooks

      To keep the door open

      Enjoy the benefits of the comprehensive Biohort service offering

      Assembly service

      The Biohort Equipment Locker is delivered in individual parts for home assembly. Use our assembly service for quick and uncomplicated assembly.

      Request a catalogue

      Have you gained a small insight into the Biohort products here? We would be delighted to send you copies of our catalogues and look forward to your enquiry!

      Product advice

      Customer service is our top priority. With the help of our product advisers, you will get a quick and easy answer to your question. Expert personnel are available for you on all working days.

      Full Brochure English en Download 10.56 MB
      Catalogue Norway nb_NO Download 10.57 MB
      Full Brochure Hungarian hu Download 10.59 MB
      Brochure CasaNova English en Download 6.06 MB
      Brochure Foundation Solutions English en Download 14.2 MB
      Minifolder en Download 4.7 MB
      Minifolder CZ cs Download 4.66 MB
      Minifolder SK sk Download 1.83 MB
      Assembly Manual Equipment Locker de, en, es, fr, it, nl, da, hr, nb, pl, sk, sl, sv, cs, hu Download 5.99 MB
      Assembly Manual Equipment Locker LARGE de, en, es, fr, it, nl, da, sv, nb, pl, sk, sl, cs, hu, hr Download 5.33 MB
      Assembly Manual Garden Shed (Floor Frame) de, en, es, fr, it, nl, dk Download 1.19 MB
      Assembly Manual Garden Shed (Floor Panels) de, en, es, fr, it, nl, dk Download 689.9 KB
      Assembly Manual SmartBasePLUS de, en, es, fr, it, nl, dk Download 10.06 MB
      Assembly Manual "Electrical Mounting Panel" de, en, es, fr, it, nl, dk Download 1.12 MB
      Assembly Manual "Suspension Basket with Rail" de, en, es, fr, it, nl, dk Download 449.51 KB
      Assembly Manual "Hook Set" de, en, es, fr, it, nl, dk Download 404.13 KB
      Assembly Manual Door baskets, Shelf baskets de, en, es, fr, it, nl, da, sv, nb, pl, sk, sl, cs, hu, hr Download 1.06 MB
      Assembly Manual "Shelves" de, en, es, fr, it, nl, dk Download 878.06 KB
      Operating Instructions LED Light de, en, es, fr, it, nl, hu Download 1.14 MB
      Point Foundation Plan Europa 2, Equipment Locker 150 LARGE de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 181.15 KB
      Point Foundation Plan Europa 3, Equipment Locker 230 LARGE de, en, es, fr, it, nl, hu, sk, pl, sl, fi, sv, da, cs, hr Download 174.49 KB
      Concrete Foundation Plan Europa 2, Equipment Locker 150 LARGE de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 216.48 KB
      Concrete Foundation Plan Europa 3, Equipment Locker 230 LARGE de, en, es, fr, nl, pl, it, sk, hu, sl, fi, sv, da, cs, hr Download 219.52 KB
      Point Foundation Equipment Locker 150 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 95.1 KB
      Point Foundation Equipment Locker 90 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 95.1 KB
      Point Foundation Equipment Locker 190 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 186.52 KB
      Point Foundation Equipment Locker 190 LARGE de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 140.89 KB
      Point Foundation Equipment Locker 230 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 80.69 KB
      Concrete Foundation Plan Equipment Locker 90 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 83.32 KB
      Concrete Foundation Plan Equipment Locker 190 LARGE de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 140.27 KB
      Concrete Foundation Plan Equipment Locker 150 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 92.43 KB
      Concrete Foundation Plan Equipment Locker 190 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 216.76 KB
      Concrete Foundation Plan Equipment Locker 230, Europa 2A, Woodstock 230 de, en, es, fr, it, nl, pl, sk, hu, sl, fi, sv, da, cs, hr Download 124.02 KB
      Parts List Equipment Locker 90 de Download 340.11 KB
      Parts List Equipment Locker LARGE 150, 190, 230 de, en, fr, nl, es, it, da Download 426.11 KB
      Parts List Equipment Locker 150, 230 de Download 467.77 KB
      Parts List SmartBasePLUS de, en, es, fr, it, nl Download 438.89 KB
      Submission Plan Equipment Locker 230 de, en, fr, nl Download 596.4 KB
      Submission Plan Equipment Locker 190 de, en, fr, nl Download 850.11 KB
      Submission Plan Equipment Locker 90 de, en, fr, nl Download 405.42 KB
      Submission Plan Equipment Locker 150 de, en, fr, nl Download 532.05 KB
      Auswahl zurücksetzen

      You can filter for show models near you in our dealer search.

      You can purchase Biohort products from our online shop or our dealers – see dealers in your area

      No! We provide free kerbside delivery to the following countries: Austria, Germany, Switzerland, France, Netherlands, Belgium, Luxembourg, Denmark, Great Britain, Ireland, Sweden, Finland, Spain, Italy, Hungary, Czech Republic and Slovenia. The pre-requisite is that the delivery address is on the mainland and that the road is passable for a 38-tonne lorry (clearance height of 4 m). The products are delivered either to the store or directly to the customer's home. If you want the product to be delivered to an island, please ask for the relevant island surcharge at office@biohort.at.

      You can find out the retail prices of our products from our numerous retail partners or in our Biohort online shop.

      Price information is available from our specialist dealers or via our online shop.

      You can order spare parts directly from our customer service department at customerservice.gb@biohort.com.

      Please state the product type, purchase date, your address and the spare part you need. You can download the parts list for your product to view the spare parts here.

      You can also contact the Biohort Assembly Partner covering your area directly and book the assembly appointment. In this instance, you will pay the installer directly for the service provided.

      The appointed installer will get in touch with you within three working days of the order being placed to arrange an assembly date. We guarantee an assembly date within six weeks from confirmation of your order. The courier commissioned by us will deliver the goods to your home, free kerbside, approximately one week before the scheduled assembly date.

      See our assembly terms and conditions for further information.

      The assembly service can also be booked in the online shop for Austria and Germany. The assembly flat rate fee is listed as an accessory for the respective product. Choose the relevant product size and add the assembly flat rate fee to the basket.

      See our assembly terms and conditions for further info.

      • Travelling to and from the assembly site
      • The transport of the packaged product to the assembly site (maximum 20 metres).
      • Assembly of the Biohort product incl. accessories (excluding SmartBase foundation, SmartBasePLUS foundation and side canopies) from the top edge of a completed, level foundation.
      • Storm-proof anchoring depending on the product and the surface.

      See our assembly terms and conditions for further info.

      Biohort has certified independent Assembly Partners. You can find the Assembly Partner covering your area here. You can contact them directly or (for Austria and Germany) book the assembly appointment in our online shop.

      You can find the guideline assembly prices here. The assembly flat rate fee for all sizes can be found with the accessories for the product in question in our online shop. Select the desired product size and add it to the basket. The assembly terms and conditions for any assembly appointment booked in our online shop can be found here. Any additional services (e.g. disposal of the packaging, sealing of the foundation) can be agreed directly with the installer.

      Standard products in stock are delivered as quickly as possible within three weeks of placing the order. The actual delivery times for individual products are listed in our Biohort online shop.

      You can agree a fixed delivery week (calendar week). Please let us know when you place your order. However, please note that there must be at least 3 weeks between placing the order and delivery.

      We deliver the goods you order directly to the delivery address of your choice. The goods are delivered with parcel services or a shipping company, depending on weight or size. If the item is delivered by parcel services (LeisureTime Box 100/130, Parcel Box or small accessory), there is NO prior notification of delivery. 
      If your product is being delivered by a shipping company, you will be contacted by the latter as soon as your goods arrive at the delivery warehouse. You must schedule the delivery on one of the two following working days.  

      Delivery is "free kerbside", which means that the recipient is responsible for moving the goods onto their property (into the garden, for example).  The transport packaging (including any wooden crates) is retained by the recipient and will not be taken back by the shipping company, except for Euro pallets that must be returned. For delivery by a shipping company ("free kerbside"), please provide your e-mail address & telephone number we can use to contact you during the day. 
      Please note that the following conditions must be met for delivery by a shipping company: 

      • Minimum road width: 3 metres 

      • Vertical clearance: 4 metres 

      • Road accessible for 38-tonne lorry

      • Turning room must be available 

      Yes, however, a freight surcharge may apply for island deliveries. Please check this with office@biohort.at.

      A delivery date can only be agreed for deliveries by a shipping company. If your product is being delivered by a shipping company, you will be contacted by the latter as soon as your goods arrive at the delivery warehouse. You must schedule the delivery on one of the two following working days. The product will then be delivered during the day.

      Biohort products are delivered in individual parts in sturdy corrugated cardboard boxes for self-assembly. Only the LeisureTime Box 130/160 can be ordered in the Biohort online shop ready-assembled for destinations in Austria and Germany!

      Please note the following points for correct goods acceptance. 

      • Check against the included delivery note that you have the right number of packages and that the colour and size are correct, as well as checking each box for obvious transport damage. If you notice any irregularities, be sure to note them on the carrier's delivery receipt, or in the digital signature field ("goods damaged", "damaged", "box missing"). 

      • The driver must give you sufficient time to do this and must confirm the complaint with a signature (incl. lorry registration number). 

      • Please also accept damaged packages!  
        After examining the facts, we will replace the damaged parts free of charge and deliver them without delay. 

      • Please report any irregularities during goods acceptance within three working days, by sending us an email with photos to our customer service team at customerservice.gb@biohort.com

      Please inform us of planned holidays, business trips or similar at the same time as placing your order. If you cannot accept delivery at short notice, please contact us immediately on +43 (0) 7282 77 88-0

      Please note that there may be a charge for storage or 2nd delivery, if the carrier is unable to reach you.

      "Delivery free kerbside" comprises the single transport from our factory to the delivery address supplied (mainland only), last kerbside, provided that the road is passable for a 38-tonne lorry. You will receive telephone notification from our shipping company approximately 2-3 days before the actual delivery to inform you of the exact delivery date. Please ensure that, when placing your order, you provide your e-mail address & telephone number we can use to contact you during the day. Please ensure that you leave enough room for the delivery, depending on the size of product ordered.

      We offer free kerbside delivery in Austria, Germany, France, Switzerland, Netherlands, Luxembourg, Denmark, Great Britain, Ireland, Sweden, Finland, Belgium, Italy, Spain, Hungary and Norway. An island surcharge is applied for delivery to some islands. Please enquire about this at office@biohort.at

      We recommend that the boxes are carried by at least two people, depending on the size and weight of the boxes.
      Please note that the delivery driver is not obliged to carry the goods to your desired storage location or assembly site. 

      Our products are intended for self-assembly and are packed and delivered in individual parts. Depending on the products, the parts are packed in one or more sturdy corrugated cardboard boxes that are clearly labelled on the outside. Additional protection in the form of wooden slats, polystyrene and plastic fleece material is provided for sensitive parts. Orders containing more than nine boxes are partly shipped with additional packaging in the form of wooden crates. The customer is responsible for disposing of all of the packaging material.

      Depending on size, the boxes are fitted with handles or recessed grips. We recommend that at least two persons carry the boxes due to their size and weight.

      One single box can weigh up to 73 kg depending on the product.

      If you do not unpack your Biohort product immediately, please ensure that the packages are stored in a dry place. Should the boxes get wet or damp, we can accept no liability for any subsequent damage to the goods. 

      The boxes should be stored horizontally on a continuous, supporting surface.  

      A pair of scissors and a pre-marked cut line appear on the boxes, indicating where the box can be opened with a utility knife. Please lift the individual components from the packaging with care (do not drag them!). 

      The SmartBase or SmartBasePLUS is a complete solution comprising adjustable feet or ground screws, a special frame and aluminium floor boards. The optional aluminium floor frame is no longer required in this instance and does not need to be fitted. The optional aluminium floor panels are also replaced by the aluminium floor boards.

      The SmartBase Foundation is the ideal foundation for uneven concrete or paved areas. It consists of high-quality aluminium floor boards, a special foundation frame and height-adjustable feet. 

      Original soil is required for the SmartBasePLUS. It is also important to ensure that the soil is free from large stones, pipes and coarse roots. Test holes should preferably be drilled in advance (e.g. using an iron rod at least 60 cm long). 

      The aluminium boards of the SmartBase foundations can withstand loads of up to 200 kg/m².

      The installation of a vapour barrier (= a water-impermeable plastic film with a minimum thickness of 150 µ) is highly recommended, as it protects against rising ground moisture. It is important to ensure that the membrane is not larger than the storage shed surface area. Please refer to our foundation tips for further details. .

      If you have not yet considered incorporating a vapour barrier in the foundation, it can also be retrofitted inside the shed using the aluminium floor frame: Spread out the vapour barrier and pull it slightly up the side on the aluminium floor frame. Then lay the XPS hard foam panels on top followed by the aluminium floor panels (or another suitable floor). Finally, trim the protruding membrane to lie flush with the upper edge of the aluminium floor frame.

      The recommended foundation dimensions can be found in the technical data for the respective product. If you are erecting a new concrete or point foundation, please refer to our concrete foundation plans and point foundation plans.

      Please refer to our foundation tips for the concrete foundation plans and point foundation plans.

      A foundation must be erected for the Storage Sheds, Equipment Locker and the MiniGarage. Please refer to our foundation tips.

      A level, solid hard surface is required for the WoodStock, StoreMax and HighBoard products as well as for the Romeo Patio Locker. These products must be anchored to this hard surface with the screws and dowels supplied.

      The outdoor boxes (LeisureTime Box, LoungeBox and StyleBox) must also be installed on a level, solid surface. These products do not need to be secured to the ground.

      The Raised Vegetable Bed, Belvedere Planting Bed, DaVinci and MonAmi Composter can be installed on all level surfaces.

      The various foundation options are described in detail in our foundation tips.

      Biohort products must be installed on an absolutely level surface. There must be no incline. Various suitable foundation options are available. Click here for our foundation design tips.

      The fastening material (screws and dowels or also anchors with the aluminium floor frame) is supplied. Biohort cannot accept any liability for damage caused by insufficiently secured products.

      A floor frame is required in the following situations: Point foundation, inadequate* concrete slab, paved or concrete foundation without step.

      The floor frame provides a continuous bearing surface for the floor profile (joints, coarse subsoil) and makes it easier to incorporate the sealing joint.

      *inadequate: minimally uneven, coarse subsoil

      Click here for more foundation tips: Foundation tips.

      No specific specialist skills are required for assembly. A detailed assembly manual is supplied with our products. You can download the assembly manual in advance from our website.

      Specific socket and open-ended spanners are supplied. The following additional tools and aids are required or could be useful:

      • A sharp knife for opening the box
      • Flat-bladed and Phillips head screwdrivers
      • Combination wrench, 13 mm opening
      • Percussion drill with Ø 10 mm masonry drill (for fastening anchors)
      • Retractable tape measure
      • Stepladder
      • Spirit level
      • Cordless screwdriver (useful)
      • Folding trestles x 2 (useful)
      • Socket set (useful)


      To avoid scratches, please also ensure that a suitable support surface is used for assembly.

      As the Garden sheds and the equipment locker should be sealed on the surface that meets the foundation, we recommend a suitable sealant. This silicone-like compound should be acid-free and suitable for outdoor use.

      This depends on a few factors:

      • The skill of the "assemblers" and how many there are of them
      • The weather conditions (never build in windy weather!)
      • The space situation (at least 70 cm of space all-around)


      Because we have years of experience, however, we can give guideline values. Please note that these estimates relate purely to the time taken for the work. Please read the assembly manual beforehand, including all notices. 

      Europa Garden Shed:

      3 to 6 hours (depending on size)

      Neo Garden Shed:

      6 to 12 hours (depending on size)

      HighLine/Panorama/AvantGarde Garden Shed:

      5 to 8 hours (depending on size)
      HighLine/Neo Side Canopy: 4 hours
      Equipment Locker: 2 to 3 hours
      MiniGarage: 2 to 3 hours
      HighBoard: 1 to 2 hours
      Romeo Patio Locker: 2 to 3 hours
      LoungeBox: 1 to 2 hours
      Alex: 0.5 to 2 hours
      StyleBox: 20 minutes
      LeisureTime Box/ParcelBox: 0.5 to 2 hours

      StoreMax:

      0.5 to 1.5 hours
      WoodStock: 1.5 hours

      Raised Vegetable Bed/Belvedere:

      10 minutes
      DaVinci: 0.5 to 3 hours (depending on size)
      MonAmi Composter: 30 minutes
      Charly Robotic Lawn Mower Garage: 1 hour
      SmartBasePLUS Foundation: 3 to 5 hours (depending on size)
      Privacy Screen: 2 to 4 hours 
      (Attention: The type of concrete is not taken into consideration. Please ask the manufacturer for setting time information!)
      BikeLift: 1 hour

      At least two people are needed to assemble the Biohort products.

      The detailed product assembly manual is supplied. This can also be downloaded from our website.

      Check the delivered goods for completeness (size, colour, number) and possible damage. Ensure that you have enough space (at least 70 cm around the foundation) and helpers to assist with the assembly. You are advised to read the assembly manual in advance.

      Biohort has certified independent Assembly Partners. You can find the Assembly Partner covering your area and the guide prices here. You can contact them directly or (for Austria and Germany) book the assembly appointment in our online shop. The assembly terms and conditions for any assembly appointment booked in our online shop can be found here.

      An even, level hard surface is essential for successful assembly. Leave a space of at least 70 cm all around the assembly area. Please open the boxes as noted on the boxes themselves. Should any parts be damaged, do not fit them, but inform customer services immediately, enclosing photos.  

      Please place the individual parts on suitable surfaces/supports to avoid scratches. Wear gloves during assembly - some parts may have sharp edges. 

      Sealants are available from various manufacturers. It is important to ensure that they are suitable for outdoor use and do not attack the metal parts (acid-free). Appropriate products are available from builders' merchants. The sealant can be used to seal the foundation depending on the hard surface. Please refer to our foundation tips.

      The sealant is used to seal the bearing surface of the floor profile (or floor frame) and foundation to prevent rainwater seeping into the garden shed. See our foundation tips for more detailed information.

      The foundation must be absolutely level for the successful assembly of our products.  

      With the Biohort SmartBasePLUS foundation for slopes and lawns, it is possible to compensate for a slope of 15 cm. Extension sets for the ground screws can also be provided on request, to achieve compensation of max. 55 cm overall.  

      Please note that with this foundation, only one side of the shed can be raised. The foundation screws are not suitable for raising the entire shed. 

      On a firm surface, the SmartBase can compensate for a slope of up to 4 cm.  

      See our Foundation Tips for more detailed information. 

      Safety advice for each product can be found on the opening pages of the assembly manual.

      Basically: 
      Keep all small parts or packaging materials supplied away from small children during assembly. Some components have sharp edges or protrude. This should be borne in mind when assembling the product and during daily use. Gloves are included and can be used if necessary.  

      Note that relatively high temperatures may develop in the garden shed (heat generation similar to that in a car). Find out the storage conditions for the products stored in the garden shed from the respective manufacturers.    

      BikeLift: 
      The aluminium rail must be examined before use to check that it is dry.  
      Other people should also be prevented from standing in the danger area when you are using it. Children may only use the BikeLift under adult supervision.

      Biohort products are Faraday cages, meaning that lightning protection is not required. The Faraday cage is an enclosure comprising an electrical conductor (e.g. wire mesh or sheet metal) that is closed on all sides and acts as an electrical shield. In the event of external static or quasi-static electrical fields, the inner section remains unaffected because of the shield effect.

      For precise safety instructions (regarding the use of the shed during thunderstorms), please consult a qualified electrician.

      The roof of the garden sheds is designed to withstand a max. snow load of 150 kg/m² (CasaNova 215 kg/m²). However, roof avalanches can cause damage to the roof.

      Our correctly assembled and properly anchored garden sheds are successfully tested in a wind tunnel at wind speeds of up to 150 km/h.  

      Please make sure that they are properly anchored to the ground. Biohort cannot accept any liability for damage caused by insufficiently secured products, or lids/doors that are not locked. 

      The Biohort storage solutions are all lockable and are therefore classed as "lockable containers" for insurance purposes. The Panorama, HighLine, AvantGarde and Neo Storage Sheds as well as the CasaNova Outbuilding are the most secure against burglary.

      What is classed as burglary?
      A burglary is theft accompanied by break-in. This occurs when the perpetrator gains access to insured premises by using force, tools, unlawfully produced keys or keys previously taken from another insured premises by burglary or robbery in order to steal insured items. A burglary also occurs if the perpetrator enters or creeps into insured premises by overcoming difficult obstacles or gains entry through openings not intended for access. Finally, entry into locked containers and the theft of items contained therein also constitutes burglary.

      Biohort products need very little care due to the high-quality materials used and careful workmanship. Simply lubricate the lock and hinges every year and regularly clean the StoreMax sliding rails or treat them with silicone spray. In the event of soiling due to weather and environmental conditions, clean using just water and the Biohort CleanLine Universal Cleaner. A high-pressure cleaner can also be used (maintain a distance of at least 10 cm between the lance and the lacquer. Do not use a steam cleaner. Max. pressure approximately 80 bar). To preserve the lacquer surface, we recommend Biohort CleanLine Preservation, which provides the lacquer surface with optimum protection against weather and environmental conditions. 

      The gutter should be cleaned several times a year, to ensure optimum drainage. If the gutter is blocked, it may overflow. No liability can be accepted for any resultant damage.  

      IMPORTANT: Sea air/ambient air containing salt water and/or salt, aggressive and abrasive cleaning agents, road salt, fertilisers, fresh concrete, screed materials and other chemical substances (never store this type of product in the open) can attack the lacquer and zinc surface, thereby leading to corrosion. Warranty claims are no longer valid in such cases. 

      We recommend that you clean the affected areas with a limescale remover. Make sure that it is compatible with metal and paint. Ask your local building materials or garden centre for advice. Alternatively, you can also use a mild car shampoo, as this generally achieves very good cleaning results. However, do not use any aggressive, abrasive cleaning agents or vinegar cleaners, as these could damage the coating.

      On all magnetic elements inside the garden shed (e.g. on the roof beams).

      The LED light is attached using a magnetic strip.

      The screw size for this is minimally variable. The size of the sheet metal screws should range from 3.2 to 3.9 mm. The holes for inserting cables are 22 mm in diameter.

      Garden sheds max. 6 pcs.
      MiniGarage max. 6 pcs.
      HighBoard 200 max. 4 pcs.


      Commercially available surface-mounted sockets/switches are used.

      During the winter, it can generally be assumed that the temperature inside the product will equate to the outside temperature as there is no insulation.

      Biohort products can heat up on exposure to prolonged sunlight in the same way as cars. Regular ventilation is required in this respect in order to regulate the temperature.

      Biohort products do not emit any sounds on exposure to cold and heat as the steel plate has a very low material expansion coefficient (considerably lower than aluminium, plastic or concrete, etc.).

      Only products with a door handle (Neo/HighLine/AvantGarde/Panorama) can be incorporated into a keyed alike system or replaced with a new cylinder lock. The cylinder for the mortise lock is 54 mm long with a central division (27 mm each).

      The tool hangers have a max. load-bearing capacity of 10 kg.

      The shelves have a max. load-bearing capacity of 15 kg and the support rails 100 kg.

      All accessories fitted inside the garden sheds or boxes can easily be retrofitted.

      Biohort products are subject to the DIN 4102 standard and are classified according to building material rating A1 under products without combustible components.

      Biohort products can withstand the following surface loads when applied evenly:

      Highline, Panorama, AvantGarde, Neo and Europa Garden Sheds, MiniGarage, Woodstock and Equipment Locker: 150 kg/m²
      CasaNova: 215 kg/m²
      StoreMax: 100 kg/m²
      HighBoard, LoungeBox, LeisureTime Box, Romeo, Alex, StyleBox: 30 kg

      Roof overhang (mm)
      Model / sizefrontrearrightleft
      HighLine HS/H1100
      HighLine H2
      HighLine H3
      HighLine H4
      HighLine H5
      Panorama P116080100
      Panorama P2
      Panorama P3
      Panorama P4
      Panorama P5
      AvantGarde A1, A2, A3, A43907030
      AvantGarde A5, A6
      AvantGarde A7
      AvantGarde A8
      Europa 120100
      Europa 2
      Europa 2A
      Europa 3
      Europa 4
      Europa 4A
      Europa 5
      Europa 6
      Europa 7
      Equipment Locker 9015
      Equipment Locker 150
      Equipment Locker 230
      Romeo M, L Patio Locker10
      MiniGarage20
      Woodstock 150220220
      WoodStock 230
      CasaNova 3 x 2140
      CasaNova 3 x 3
      CasaNova 3 x 4
      CasaNova 3 x 5
      CasaNova 3 x 6
      CasaNova 4 x 2
      CasaNova 4 x 4
      CasaNova 4 x 5
      CasaNova 4 x 6
      Neo47

      The external, internal and foundation dimensions can be found either in the last few pages of the Biohort brochure (technical details) or online. To view this data, click on the desired product on the Biohort website and then go to technical details. You can also download the respective submission plan and foundation plan.

      ATTENTION: The exterior dimensions always include the roof overhang and the height shown is the highest point of the product.

      No rainwater downpipe is provided or required for the Equipment Locker and MiniGarage. The inner roof supports contain a polystyrene insert that curves upwards such that the roof is slightly curved. This allows the water to run off evenly on all sides.

      The BikeHolder bicycle holder can be used with all garden sheds, the 230 Equipment Locker, possibly the 150 & 190 Equipment Locker (depending on the length of the bicycle - 150: max. 130 cm, 190: max. 170 cm), the StoreMax 190 and the HighBoard 200.

      The BikeHolder is a horizontal base plate with bicycle clamping brackets. Bicycles can be placed in these clamping brackets. The base plate is hooked into the support rails of the Garden Shed/Equipment Locker (two rails are supplied as standard and further support rails are available as options).

      Two supports rails are supplied with the BikeHolder for the StoreMax 190. For the HighBoard 200, no support rails are used for the BikeHolder - the base plate is attached to the side wall.

      Biohort uses only the best material for all its products. Biohort products are made from high-quality, galvanised, polyamide enamel coated steel from Austria and Germany. Premium car manufacturers such as Mercedes-Benz, BMW or Audi have relied on the high quality of these renowned steel producers for years. This is the reason why we can offer our customers a 20-year guarantee against corrosion with a clear conscience. Individual components are made from aluminium.

      Biohort products are rainwater-proof.

      Passive ventilation is provided for in our Biohort products, except for the CasaNova Outbuilding. In this case, the acrylic glass panel can be opened on two sides for ventilation purposes. ATTENTION: This sliding function is not included in the double version of the acrylic glass skylight, which is available as an option.

      During assembly, make sure that a vapour barrier is installed to prevent rising soil moisture (see foundation design). In the case of high humidity and large temperature fluctuations, condensation can nevertheless form on the inside of the roof overnight. This is due to physical reasons, but can be avoided by insulating the inside of the roof with polystyrene panels/XPS hard foam panels (thickness: 2 cm for Europa and AvantGarde; 3 cm for HighLine, Panorama, Equipment Locker and MiniGarage). These panels are available from all builders' merchants. Garden sheds in the AvantGarde, Panorama and HighLine series are designed for interior roof insulation as are the Equipment Locker and the MiniGarage. We are pleased to provide fixing material for the Europa model. Please write to us at customerservice.gb@biohort.com.

      As with other outdoor items (garden furniture, window ledges, etc.), there is also a certain amount of noise in garden sheds when it rains. How aware you are of this is heavily dependent on personal perception, however, and can vary. 

      You can insulate our garden sheds to deaden the noise. Garden sheds in the AvantGarde, Panorama and HighLine series are designed for interior roof insulation. Fixing material can be supplied for garden sheds in the Europa series. Please complete the spare part request form here on our website. Our customer service will then contact you and prepare a quote, as necessary. 

      Our tip: You are welcome to visit the showrooms of our retail partners and get an idea of what our products look like.  

      The products can be installed on a roof terrace if building regulations are met.

      IMPORTANT:Ensure that products are anchored securely in case of stormy weather (fixing material supplied). Biohort cannot accept any liability for damage caused by insufficiently secured products.

      The Garden Sheds and Equipment Locker are designed to be free-standing (secured to a hard surface). We can provide the appropriate wall mounting parts for the Equipment Locker and the Europa Garden Shed on request (already supplied with Europa size 2A and 4A). We recommend additional fastening to the floor despite attachment to the wall.

      The Romeo Patio Locker has perforated holes at the rear - hence it can be fastened to a wall as well as the floor.

      There is no wall fastening for the HighLine, AvantGarde and Panorama Garden Sheds.

      Please note that we accept no liability for inadequate fastening.

      Biohort products are not designed to house animals.

      Biohort products are designed as storage solutions. Insulating panels can be fitted to the inside of the roof of the Garden Sheds/Equipment Locker/MiniGarage, if required. The AvantGarde, Panorama and HighLine Garden Sheds are designed for roof insulation, as are the Equipment Locker and MiniGarage. Fixing material for roof insulation can be supplied with garden sheds in the Europa series. Please write to us at customerservice.gb@biohort.com.
      The Romeo Patio Locker is fitted with a reinforced roof plate, which is mounted without a roof support. Roof insulation is not feasible in this situation.

      Europa Garden Shed series

      up to 180° (depending on the door position and optional rainwater downpipe)

      Garden sheds in the Neo, AvantGarde, HighLine and Panorama series

      90° or 115° (can vary depending on the position of the gas spring)

      Equipment Lockerup to 180 °
      Romeo Patio Locker90°, 115° or 135° (depending on the choice of the gas spring position)

      A 100% level foundation is required in order to ensure optimal door adjustment. The side walls of the shed must be aligned so that they are not warped and the door cannot get stuck.

      Lift/lower the door:
      The hinges on the door frame are screwed into holes with a little play. This allows the hinges to be moved up/down and adjusted as required. In order to do this, the hinge retaining screws must be loosened once again and the hinge parts moved accordingly. This allows the door panel to be adjusted.

      Move the door to the left/right:
      To do this, please loosen the screw connections on the front (bottom and top profile), adjust the doors correctly (to the left or right) and retighten the screw connections. The door gap should be approximately 4-6 mm wide.

      The optional aluminium floor frame can also be retrofitted with a little extra time and effort.

      The hinge for the Europa Garden Shed, Equipment Locker and WoodStock can be chosen during assembly. A left-sided hinge can be ordered for the standard door on request and at additional cost for the AvantGarde, Panorama and Highline Garden Sheds (stainless steel door handle).
      The door opening cannot be changed on the Neo Garden Shed, the MiniGarage and the Romeo Patio Locker.

      Biohort colours do not correspond to any RAL number but some of them share similar features to RAL numbers. We recommend that you view the original colour samples at our dealers. If you wish, you can also request a colour sample chart from Biohort.

      White

      This colour is not similar to a RAL colour

      Green

      Similar to RAL 6005

      Metallic quartz grey

      Similar to RAL 7039

      Metallic silver

      Similar to RAL 9006

      Metallic dark grey

      Similar to RAL 7016

      Grey white (interior colour)Similar to RAL 9002
      Metallic bronzeThis colour is not similar to an RAL number

      All Biohort products are supplied with different locks. Depending on the product group, the locks can be subsequently ordered with a uniform lock provided that the respective products have an identical lock design. Contact our Customer Service team for further information (customerservice.gb@biohort.com).

      The data applies to medium-sized bicycles
      in the Europa garden shed, with a max. rim diameter of 26" or maximum length of 175 cm.
      Larger bicycles may be placed on the gable side, from size 3 upwards.

      Equipment Locker 150, 190: 1 children's bicycle up to 24 inches
      Equipment Locker 230: 2 children's bicycles up to 24 inches
      Europa size 1: 1 bicycle
      Europa size 2: 2 bicycles
      Europa size 2A: 2 bicycles
      Europa size 3: up to 4 bicycles
      Europa size 4: up to 6 bicycles
      Europa size 4A: 4 bicycles
      Europa size 5: 6 bicycles
      Europa size 6: up to 8 bicycles
      Europa size 7: 8 bicycles
       
      The data applies to medium-sized bicycles -
      for the AvantGarde garden shed, with a max. rim diameter of 29" or a maximum length of 185 cm.
      A floor frame is recommended if the bicycles are suspended on the back wall.
      Size A1 and A2: 2-3 bicycles
      Size A3 and A5: 4-5 bicycles
      Size A4 and A7 6-7 bicycles
      Size A6: 5-6 bicycles
      Size A8: 8-9 bicycles
       
      The data applies to medium-sized bicycles -
      for the HighLine and Panorama garden sheds, with a max. rim diameter of 29":
      Size H1/P1: 3-4 bicycles
      Size H2/P2: 4-5 bicycles
      Size H3/P3: 5-6 bicycles
      Size H4/P4: 6-7 bicycles
      Size H5/P5: 7-8 bicycles
       

      The data applies to medium-sized bicycles
      for the Neo Garden Shed, with max. rim diameter of 29":

       

        Side wall  Back wall
        bicycles bicycles
      Neo 1C 3-4 7-8 
      Neo 1D  3-4 9-10
      Neo 2C 5-6 7-8 
      Neo 2D 5-6 9-10
      Neo 3A 7-8 3-4 
      Neo 3B 7-8 5-6
      Neo 3C 7-8 7-8 
      Neo 3D 7-8 9-10
      Neo 4A 9-10  3-4 
      Neo 4B 9-10  5-6
      Neo 4C 9-10  7-8 
      Neo 4D 9-10  9-10

      With the optional BikeMax bicycle holder, one to two bicycles with a 24" rim diameter or maximum length of 175 cm can be stored in the Equipment Locker. One BikeMax can be mounted on each side wall (sizes 150, 190 and 230). Only one BikeMax can be used with Equipment Locker 90 (however, the remaining usable space for storing other items is relatively small).

      The BikeHolder bicycle stand is not recommended for the equipment locker, as it can only be used with size 230 and possibly with size 190 and 150 (depending on the bicycle length: max. 170 cm with size 190 / max. 130 cm with size 150). However, with both equipment lockers there would then hardly be any remaining floor space.

      The BikeMax bike holder can be installed in the Biohort Garden Sheds/Equipment Locker (plug-in system). Both bicycles with narrow tyres and mountain bikes can be stored safely thanks to the V-shaped groove in the fastening profile. The bicycle is suspended from the front rim. The wheel's centre of gravity is thus far enough away from the suspension point to allow the bike to centre itself and not fall over. The lateral distance between the bicycle holder and the wall should range from 30 to 40 cm (depending on the width of the handlebars).

      If several bicycles holders are installed next to each other, a distance of approximately 55 to 60 cm is appropriate. A different distance can, of course, be selected. If the bicycles are hung at different heights, the distance between the bicycle holders can be reduced to 30 to 40 cm, thus saving space. In order to do this, mount the suspension bracket alternately on the upper and lower group of holes on the guide rail.

      The mounting dimensions supplied are approximate values. The local conditions and bicycle sizes must be taken into account during installation. If the distance between the bicycle holders is too small, it will not be as easy to suspend and remove the bicycles as it would be with a larger distance.

      The optional aluminium floor frame (= 40 x 40 mm tube-shaped aluminium frame) is an ideal addition, regardless of the type of foundation chosen. The floor frame is required with a gravel base, concrete slabs/paving as well as with a point or strip foundation. The floor frame is not mandatory with a smooth, level concrete foundation (without step). It is, however, recommended as it facilitates sealing or application of the sealing joint.

      EXCEPTIONS: The aluminium floor frame cannot be used in conjunction with the SmartBase foundations and with the concrete foundation with lateral graduation (stepped border or water barrier). See the foundation tips for further information.

      The optional aluminium floor panel (= 2 mm chequer plate) can only be used in conjunction with the optional aluminium floor frame. Please note that the aluminium floor panel must be fully lined with a 2-3 cm thick XPS hard foam panel. The hard foam panels are not supplied but are available from builders' merchants.

      The intermediate floor is included among the items supplied for DaVinci. The planter insert is available as an optional accessory.  

      Yes, retrofitting is possible here. The Privacy Screen and Trellis can be ordered directly from our online shop, or from one of our retail partners.  

      There is a risk of tipping over in storms and strong winds, so professional anchoring is necessary. To allow anchoring, mounting brackets are supplied with the connecting or end uprights.

      No, these two items are not compatible with the DaVinci.

      Yes you can. Please complete the spare part request form on our website. Our customer service will contact you as soon as possible and prepare a quote, as necessary.

      No support rails are required to assemble the shelves in the Neo garden shed. The shelves are attached to the side wall suspension devices. This is also possible if interior panelling and insulation are used. 

      The insulation and the gap between the electric assembly panel and the side wall are both 40 mm wide. To use the electric assembly panel, there must either be no insulation here, or the cable runs must be cut out.

      With the Neo garden shed, you can decide during assembly whether to attach the outlets for roof drainage on both sides at the front or back. The structure is then modified accordingly, so that there is a slope towards the outlets. The supplied rainwater downpipes are then fitted at these outlets.  

      The hose connection option is not available with this garden shed. If you want to direct the water further away, you could attach a Polo-kal pipe (PVC pipe, 5 cm in diameter) to the end of the outlet elbow.  

      The dimensions of the rainwater downpipe outlet elbow are 4.4 x 4.4 cm.

      Please prepare the power supply when creating the foundation. Alternatively, a cable can be run through the corner joint of the floor frame and moved to the desired position between the panel and the top profile. 

      The side canopy can only be attached to the side with the integrated gutter. This means that no more than one side canopy can be fitted on the left and on the right.
      It is not technically possible to install a side canopy from other shed sizes, so you must always order the size of side canopy that corresponds to the garden shed.  

      Since 2022, a narrow side canopy for each size of garden shed has also been available to all those who prefer a smaller version of the extension: 

      S: 414 cm 
      L: 548 cm 

      The BikeLift can be used for various wheel types, including e-bikes. But please note the following dimensions:

      Max. tyre width: 77 mm 
      Max. front tyre diameter: 74 cm (29") 
      Max. weight: 30 kg 

      The end of the back mudguard or luggage carrier should not protrude beyond the tyre:

      The BikeLift can be mounted on a covered building wall (brickwork, concrete, wood) in just a few easy steps, or installed with a suspension rail in a Biohort garden shed. Enough space must be allowed when using the swivel mount.  

      Let us know which variant you require when you order!  

      *Europa garden shed: 
      Please make sure that you fit the BikeLift at the highest point in the Europa garden shed (centrally on the back wall). If you want to attach several BikeLifts, please note that the size and length of the bicycles must not exceed the lowest interior clearance height, less 15 cm (for safety).  

      A padlock (with a combination lock) is among the items supplied. The holes for attaching it are already pre-drilled. For safety reasons, this must be attached if the BikeLift is not being used.

      If there is no bicycle hooked into the BikeLift, it must be locked at the bottom with the padlock. This stops the carriage suddenly moving upwards if unintentionally activated. Attention: Risk of injury!

      Basically yes, but please ensure that the rear tyre of each bicycle is always on the ground.

      Our 20-year guarantee offers protection against corrosion of metal parts and for defective or unusable parts. The following are not covered by the guarantee: transport damage (the shipping company is liable for this damage), damage due to faulty foundations and/or aggressive environmental conditions (due to chlorine, salt, acid, etc.,) and indirect or consequential damage. Only the statutory 24-month warranty period applies for wear, moving parts, colour changes, and electrical, plastic and rubber parts. Details of our guarantee conditions can be found here.

      Electrical installations (such as lighting and power supply, etc.) are generally permitted. Please note that such installations should only be carried out by a licensed specialist. An appropriate power cable should be considered when laying the foundation.

      If this is not done and a cable has to be retrofitted, the cable can be laid into the shed through the front, semi-circular corner cladding (Panorama, AvantGarde and Highline Garden Sheds).

      Retrofitting is not possible with the Neo and Europa Garden Sheds or the CasaNova Outbuilding. Please ensure that you plan for a power supply when laying the foundation. If this is not done and a line has to be retrofitted, either the floor frame or a wall panel will have to be drilled in order to bring the cable into the shed or outbuilding. Please note that this will invalidate the guarantee.

      With the MiniGarage, the power cable can be pulled through one of the rear corner claddings as there is a small perforation in each corner (bottom). The HighBoard 200 has perforations in the floor and within the back wall. These can be pressed-in to insert the cables. We offer an electric mounting panel for the straightforward installation of switches, sockets and the like in the Garden Sheds, Equipment Locker, MiniGarage and the HighBoard 200.

      The Equipment Locker (from size 150) and the Europa garden shed are available only with a double door.

      Biohort products are available in the colours specified. Special paint finishes are not available due to serial production.

      Please note that independent recolouring/repainting the products will invalidate the manufacturer's warranty.

      Yes the aluminium floor panels can be easily retrofitted. However, the aluminium floor frame is essential. We recommend underlying the aluminium floor panels with XPS hard foam panels 2-3 cm thick.

      Biohort products are made from high-quality steel plate and aluminium, and are therefore 99% recyclable.

      Replacement keys for the stainless steel door handle with standard cylinder lock (CasaNova, Neo, Panorama, HighLine, AvantGarde from the 2016 model onwards) can be ordered from a locksmith on presentation of the original key. Please therefore keep one of the three keys supplied in a safe place. If a key is no longer held in stock, the integrated cylinder must be drilled.

      Keys for the T-handle cylinder lock or T-bar cylinder lock (Europa Garden Shed, Equipment Locker, Romeo Patio Locker, MiniGarage, WoodStock, StoreMax, HighBoard, LoungeBox, LeisureTime Box, Alex) can be reordered through the company Carney in Germany. The lock number (engraved on the lock) must be stated.

      Carney can be contacted at:

      CARNEY GmbH
      Westerwaldstr. 96
      57299 Burbach | Germany
      Tel. +49 2736 3562
      info@carney-gmbh.com
      www.carney-gmbh.com

      You can buy accessories directly from our online shop.

      Please complete our complaints form on our website. Our customer service will then get in touch with you.  

      To be able to process the complaint properly, we need the following data: 

      • Biohort order number (A-xxxxxxx) or a copy of the invoice

      • informative photos

      • part designation based on the parts list or assembly manual 


      We ask you not to install damaged parts without clarification. 

       

      Data sheet

      Size Exterior dimensions
      incl. roof overhang
      W x L x H (cm)

      Interior dimensions
      W x L x H (cm)

      Foundation dimensions
      W x L (cm)

      Weight
      (kg)

      Volume
      approx. (m³)

      EAN code
      metallic silver
      EAN code
      metallic quartz grey
      EAN code
      metallic dark grey
      EAN code
      dark green
      90 93 x 83 x 182,5 88 x 78 x 177 93 x 83 56,4 1,3 9003414 34030 5 9003414 30030 9 9003414 31030 8  
      150

      155 x 83 x 182,5

      150 x 78 x 177

      155 x 83

      88,1

      2,1

      9003414 34010 7

      9003414 30010 1

      9003414 31010 0

      9003414 33010 8
      150 LARGE 156 x 155 x 184 150 x 150 x 177 155 x 155 110,2 4 9003414 34910 0 9003414 30910 4

      9003414 31910 3

       
      190 191 x 83 x 182,5 185 x 78 x 177 191 x 83 101,4 2,6

      9003414 34060 2

      9003414 30060 6

      9003414 31060 5

       
      190 LARGE 192 x 155 x 184 186 x 150 x 177 191 x 155 124,1 5 9003414 34960 5 9003414 30960 9 9003414 31960 8  
      230 227 x 83 x 182,5 222 x 78 x 177 227 x 83 109,9 3,1 9003414 34080 0 9003414 30080 4 9003414 31080 3 9003414 33080 1
      230 LARGE 228 x 155 x 184 222 x 150 x 177 227 x 155 133,7 6 9003414 34980 3 9003414 30980 7 9003414 31980 6  

       

      Packed in one to three boxes, easily understandable assembly manual included.

      Note: If the floor frame is laid directly on a gravel base (approx. 10 cm gravel, without foundation or slabs), ground anchors are required for securing to the ground. Storm resistance must be ensured by the customer. For size 90, 150: 4 pcs. in total; for size 150LARGE, 190, 190LARGE, 230: 6 pcs. in total; for size 230LARGE: 8 pcs. in total are necessary.

      Equipment Locker snow load

      Biohort guarantees a max. snow load of 150 kg/m² (even load) for the Equipment Locker.

      Are you interested in the Equipment Locker?

      We would be delighted to talk to you and answer any questions. We look forward to your enquiry!

      These products may also be of interest to you

      Similar products